Suzuki Motorcycles Forum banner

Acumen speedo correction unit.

1306 Views 9 Replies 4 Participants Last post by  motomummy
Should be available in a month or so barring no problems with the first production run. It will have an lcd display and give the rider his top speed at the push of a button and an average speed that he has for those laps. Pricing will be a little bit more then the speedohealer, but not much it looks like. Should be one hell of a unit. It will give a real time display of the average speed to the rider while riding...

We'll have some of the first units into the country and you'll see a special on this forum when we get them.
1 - 10 of 10 Posts
motomummy said:
Should be available in a month or so barring no problems with the first production run. It will have an lcd display and give the rider his top speed at the push of a button and an average speed that he has for those laps. Pricing will be a little bit more then the speedohealer, but not much it looks like. Should be one hell of a unit. It will give a real time display of the average speed to the rider while riding...

We'll have some of the first units into the country and you'll see a special on this forum when we get them.
first dips :notworthy please
it will be posted on this forum immediately when they are on the website
See less See more
will they be available for the mighty R1 right away as well?
Wicked1 said:
will they be available for the mighty R1 right away as well?
There is nothing mighty about an R1
especially yours
See less See more
2
<----------Brad aka Captain Brown Nose

See less See more
2
sweet
nope will be about a month from when we started the thread. probably 3 weeks until we hear anything new and hopefully some will be in the country, but with production anything can change. I know they have prototypes already and they went great so the unit is ready to go and just needs to go through the production cycle then get imported.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top