Suzuki Motorcycles Forum banner

BarEnd Mirrors and flush mounted turn signals

1713 Views 18 Replies 11 Participants Last post by  Captain Squid
Just trying to get some feed back on bar-end mirrors and flush mounted turn signals.


http://cgi.ebay.com/ebaymotors/ws/e...m=320214429104&ssPageName=STRK:MEWA:IT&ih=011

http://cgi.ebay.com/ebaymotors/ws/e...m=370019609314&ssPageName=STRK:MEWA:IT&ih=024

I am considering getting em because the only thing i can see with the stock mirrors are my armpits. To keep the bike street legal i intend to use the flush mounted turn signals in conjunction with the mirrors.
1 - 19 of 19 Posts
i had the same idea but mst bar end mirrors look cheap and i dont knw how good you can see out of them
The mirrors will make you legal, but they do vibrate a lot.
I hate the way the barend mirros look personally, but obviously to each their own. What year is your bike?
I don't really like the look of the bar end mirrors either but i don't want to get rear ended at a traffic light buy some cager who is to busy talking on his/her cell phone to notice me on my bike. I don't really need the flush mounted turn signals but i do want the bike to the street legal.

I ride a K7 1000.
hmmm, well I don't know about your local laws, but in AZ you aren't required to have turn signals if you use "hand signals" haha... which I don't really do.. But I don't have any signals on my bike.

I'd say just adapt to the stockers, I did.. I don't like the visibility from them, but it's way better than bar ends if you ask me!
i've got the bar ends and yes, they do vibrate quite a bit, but the visibility on them is alot better than the stock mirrors... it feels a bit weird at first to look down to see behind you but once you get used to it, its much better
lexanidubs09 said:
i've got the bar ends and yes, they do vibrate quite a bit, but the visibility on them is alot better than the stock mirrors... it feels a bit weird at first to look down to see behind you but once you get used to it, its much better
Post a picture of you bike if you can so i can see what they look like on your bike. :popcorn
I use CRG mirrors and Greggs flush-mount signal, I like it never had any problems with the PoPo either
See less See more
the CRG 2inch bar end mirror works great and it is so small you can't really see it from any distance. It doesn't vibrate much at all either. Never had any problem with Popo either.(and they really tried once)

logan1 said:
Post a picture of you bike if you can so i can see what they look like on your bike. :popcorn
Not the best pic but the only I had. As you can see the small one fits nicley on the barend.

See less See more
logan1 said:
Post a picture of you bike if you can so i can see what they look like on your bike. :popcorn
let me see what i can get for ya:beer
i don't like the way they look at all, but they do keep you legal. We get mixed feedback on them with some people saying they vibrate to the point they are useless and others saying they are great. I bet a lot is bike dependant and depends on if you have weighted bar ends, bb mod, what clipons, etc to cut down on vibrations.
I think I'm going to get bar-end mirrors; just because it would be so much cheaper to street-fighter my bike then to replace plastics...

Although those round ones seem a little... well dorky. But then... I'm on a '93, so I don't have much room to talk
See less See more
Evol-E said:
the CRG 2inch bar end mirror works great and it is so small you can't really see it from any distance. It doesn't vibrate much at all either. Never had any problem with Popo either.(and they really tried once)

Not the best pic but the only I had. As you can see the small one fits nicley on the barend.

Quick question......The yellow R6.........I looked on my microfiche at the 07 R6 and the 08 R6 and neither have the headlight like the one pictured. Did the owner modify it for projector beams or am I just missing something?
Captain Squid said:
Quick question......The yellow R6.........I looked on my microfiche at the 07 R6 and the 08 R6 and neither have the headlight like the one pictured. Did the owner modify it for projector beams or am I just missing something?
wow a MOD that hijacks threads. This site kicks ass...
See less See more
Not trying to hijack the thread at all.......I just had a legit question.
Biga said:
I use CRG mirrors and Greggs flush-mount signal, I like it never had any problems with the PoPo either
Love my CRG bar end mirrors. Better view than stock and no vibration on my K7.
Captain Squid said:
Quick question......The yellow R6.........I looked on my microfiche at the 07 R6 and the 08 R6 and neither have the headlight like the one pictured. Did the owner modify it for projector beams or am I just missing something?
Yeah he modified it and added another projector beam. He has been doing it for local folks for a while now.
Evol-E said:
Yeah he modified it and added another projector beam. He has been doing it for local folks for a while now.
I was just interested at all. It looked different to me, then I noticed it and got curious
See less See more
2
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top